You Need to collect some components like :
OpenCockpits USB Axes : http://www.opencockpits.com/catalog/axe … Path=21_36
Potentiometer : http://www.opencockpits.com/catalog/pot … Path=21_36
and some piece of wood.

There are Three Diagrams :

1.

2.

3.

First Cut your stand base for your pedals :

Piece of Diagram One :


Piece of diagram two :


When you cut this you have to join this like this put two screws on bootom and final effect is like this :


After cut Pieces from Diagram three

Pieces of diagram three join together :



join this to pieces of diagram three together with two screws.

Join all of this parts with two screws its looks like this :


Such is also needed something like this


After put this base with pedal on this to look like this :


and put this on piece which size is 51cm x 37cm made of piece of wood !


And with two pedals :


add small hooks to the pedals you can see this in some pictures for two pedals you need 16 small hooks .
8 per pedal 4 going to base of pedal and 4 to base off all ruder this which i said about before.
You need to put 8 eraser per pedal 2 per side.

After you need to cut piece of wood 23 cm x 3,2 cm. and two pieces of metal which size is 105mm x 32mm and join this together !
Result :
And FINISH RESULT put this piece of wood and metal on the pedals and join with screws and drill on the medal of this piece hole and put potentiometer Join potentiometer to PCB board from opencockpits and Calibrate Finish result :